skip to Main Content

High Pressure Transducers 6,000 - 10,000 PSI

The high pressure transducers are designed for high temperature, high pressure environments.  The APS100 is designed for OEM applications where a high reliability transducer is required for temperature and pressure measurement is the OEM’s equipment.

The APS200 and APS300 are designed to be used down hole for temperature and pressure measurement.  They are designed to be used with the customers readout electronics.  The pressure port and the electronics ports can be modified for male or female metal to metal seals.

Contact the factory with any custom requirements.


The APS100 has a F250C compression fitting rated for 10,0000 PSI.  The 15 Bit digital output can be configured for SPI or I2C.  The parts are calibrated over the full operating temperature range.

The APS200 has a 1/4″ NPT pressure port and a 1/4″compression port on the electronics end.   The SPI output wires can be crimped to the TEC cable wires and can be reinserted back inside the APS200.  The TEC cable can then be attached to the compression fitting.

The APS300 is a 0.750″diameter high pressure transducer with a high operating temperature (150°C)

Back To Top